Clone-a-useless-blob kit.
I'm not a fan. I was under the impression that this would be a functioning vagina, but it's just a solid hunk of rubber. If you're okay with that, then by all means go ahead and buy this.Published: June 26, 2009
Pros:
Good idea, clear instructions, mole sets quickly.
Cons:
Mold sets a little TOO quickly, finished product is useless.
When I bought this, I assumed it would be a fun gift for my guy. I was proved wrong I suppose. Because I have seen the Clone-a-Willy kit before, I was under the impression that when finished, this would be a functioning vagina. It’s not. It’s just a hunk of rubber that you can’t use for anything except maybe a paperweight. It’s kind of a waste if you ask me.
Like others have said, the powder is very hard to mix and mold before it sets. Really what the problem is, is that people aren’t using the correct temperature of water. It has to be EXACTLY 98 degrees or the whole thing is ruined. You need to be sure to use a thermometer so that you don’t waste the kit.
Once you add the water to the powder, you have to work very quickly. The instructions say to take the mold while sitting down, preferably on the edge of the chair. I can tell you that this does not work. It will spill. I found it easier to stay upright, and squat onto the molding cup. Sexy, right? Also, the cup is EXTREMELY uncomfortable, and difficult to fit all of your "stuff" into. I agree that it should be made with flared edges.
When I lifted the cap away to see my mold I was a little disappointed. Although I’m not really sure what I was expecting. I’ve never really taken that close a look at my vag before. But I seemed to have a decent mold, so I let it sit for a bit and then added the rubber skin compound.
The next day when it dried, I peeled it out and took a look. Woo hoo, I now have a basically shapeless rubber blob. Apparently the mold didn’t take as well as I had thought. So now not only is this product not functional, it also looks nothing like my vag. It seems this has become a total loss.
I’m not sure if I would recommend this to anyone or not. It seems to work for some people and not for others. I may have made a mistake in making the mold and just not realized it.
Really I suppose my biggest complaint is that once it is made, it can’t be used for anything. I just don’t see what the point of it is, if it’s just going to sit there. I know that the website gives you the opportunity to purchase an extra bag of powder to try the mold again, but I don’t think I will. I think I'll just chalk this one up to twenty bucks down the drain... you win some, you lose some.
If you're okay with the fact that the finished product doesn’t do anything, then I think you would like this product. Otherwise, save your money.
Like others have said, the powder is very hard to mix and mold before it sets. Really what the problem is, is that people aren’t using the correct temperature of water. It has to be EXACTLY 98 degrees or the whole thing is ruined. You need to be sure to use a thermometer so that you don’t waste the kit.
Once you add the water to the powder, you have to work very quickly. The instructions say to take the mold while sitting down, preferably on the edge of the chair. I can tell you that this does not work. It will spill. I found it easier to stay upright, and squat onto the molding cup. Sexy, right? Also, the cup is EXTREMELY uncomfortable, and difficult to fit all of your "stuff" into. I agree that it should be made with flared edges.
When I lifted the cap away to see my mold I was a little disappointed. Although I’m not really sure what I was expecting. I’ve never really taken that close a look at my vag before. But I seemed to have a decent mold, so I let it sit for a bit and then added the rubber skin compound.
The next day when it dried, I peeled it out and took a look. Woo hoo, I now have a basically shapeless rubber blob. Apparently the mold didn’t take as well as I had thought. So now not only is this product not functional, it also looks nothing like my vag. It seems this has become a total loss.
I’m not sure if I would recommend this to anyone or not. It seems to work for some people and not for others. I may have made a mistake in making the mold and just not realized it.
Really I suppose my biggest complaint is that once it is made, it can’t be used for anything. I just don’t see what the point of it is, if it’s just going to sit there. I know that the website gives you the opportunity to purchase an extra bag of powder to try the mold again, but I don’t think I will. I think I'll just chalk this one up to twenty bucks down the drain... you win some, you lose some.
If you're okay with the fact that the finished product doesn’t do anything, then I think you would like this product. Otherwise, save your money.
This content is the opinion of the submitting contributor and is not endorsed by EdenFantasys.com
About author
Forum
-
Clone a pussy?
-
Did anybody personally try this? It seems pretty funny! That is if its legit!
-
Nope. We did the Clone-a-Willy and were less than impressed. I would hate to even try this one.
-
same here, tried the clone a willy kit. It is not worth full price. Then end product is not there quality wise.
18 posts Read all -
Thank you for viewing Clone-a-pussy kit – molding kit review page!
Yeah I would've assumed it was functioning too. That's too bad, I would've tried it for my guy. Thanks for the review!
You'd think they'd include at least a cheap sleeve to mold around, so it would be useful...
Once you clone your punani, what do you do with it? Do you give it as a gift, use it as a paper weight or an ashtray (hey, they are getting hard to find these days?)
I have seen dental impressions used to identify people post mortem, but not replicas of their genitalia.
Thanks for saving us a rainy day project!
LOL the ones that "function" have to be done professionally. You have to have all this stuff put inside you. There is no way this would be that. Sorry you thought otherwise.
Well obviously I know that now. But they should make that more clear.
You should send it to someone in the mail anonymously. Particularly someone that is easily skeeved. At least thats what I would do with the blob!
I would expect this to be somewhat functional too, based on its male counterpart. Do they give you a thermometer with it? MY clone a willy had one. Still didn't work for me, though
No, they didnt, which surprised me also. I had to use my own.
If I made this, do you think I could use it as like a ice mold?
Great review, very informational! Thanks.
Oh, so you can't penetrate it. Darn.
I know, i was dissappointed when i found out that its just a model of a vagina - but you could like assemble it onto like a masturbation sleve and drill a hole in it or something...bad idea?
It is kinda a waste - especially at that price. If it was just to make a paperweight or a gag of some kind, ya would think it would be a lot cheaper.
Cheers on the review
I was wondering if it was functional! Thank for letting us know it's not!
I was wondering about functionality. After all, the willy one is useable, but the pussy equivalent seemed like less of a viable home project.
In any case, I completely love and endorse Squirtie's idea of sending it to someone. Perhaps in an envelope with their address pasted on with magazine cut-outs. You may end up on some kind of government watchlist, but think of the great story you'd get out of it.
Excellent review. Hysterical.
Thanks for the review!
funny product