Clone yourself, its fun.
Most exciting toy EVER.... It is amazing. I absolutely love this toy. It technically is my husband,how can I not love it? Easy to use, definately worth the money. Very easy to set up, as long as directions are followed. This is an amazing toy.Published: June 4, 2010
Pros:
Amazingly realistic vibrating clone of your loved one.
Cons:
Very specific guidelines. ONLY ONE VIBRATION SETTING.
Clone a willy, the fun alternative to your husbands actual penis. The clone a Willy is a neat product and very realistic. This is true only if you can get it done correctly. The Clone a willy is easy to set up although the timing must be just right. The set comes with every thing you need to create an exact replica of your own penis. The rubber used is the exact same as the one they use in Hollywood to create realistic celebrity toys.
The first step in the kit is to have all the products layed out so that when your husband is hard, he can insert his penis in to the mold. Making the mold is quite easy. First, you must use the container that it is in to insert your penis, but first you must cut it down to size. For a perfect measurement, you must be hard. Cut the amount needed so that your penis fits perfectly into the container. (If you have a penis larger than 9 inches you will need to buy more rubber at the website www.cloneawilly.com). You must then put some sort of tape against the edges of the container that was just cut because if not it will cut your skin. Mixing the solution for the mold is quite easy, although you have exactly two minutes from the time that you mix it to insert your hard penis, if not the mold will solidify and become useless.
To make the mold, you must mix the powder with 1 1/4 cup of water. If you are like my husband and don't think that you have to have that exact amount, you are wrong and you will ruin the product and you will have to buy another. After you mix, you insert your penis, wait about 5 minutes and then proceed to pulling out. For the best results, let the gel sit for about 2-10 hours so that the clone does not come out bubbly. the clone will look like a clone of your own, but it will have small bubbles that are easy to remove, but they look distasteful.
Once your mold is set, mix the liquid rubber with the skin colored mixture and insert into mold. once the liquid rubber is in the mold, insert the vibrator into the liquid rubber. The clone will not shrink at all when it cures. Wait 24 hours, and your clone is ready.
Yes, that is the directions for the product, which i think is useful to know before hand, rather than to buy the product without any knowledge of the directions. This is not very easy to do if everything is not measured properly, or if you take too long to follow the directions.
About the actual Clone, well its exciting. Very enjoyable. We use this toy during foreplay and also during sex. This is an amazing toy for double penetration, the thought of having my husband inside both holes excites me the most. The vibrations are amazing, it only has one setting, but it feels great. The clone is very realistic. The color may not be as realistic as it should be, considering everyone's color differs. The only material that comes in contact with your skin during the molding process is a molding powder made from seaweed so it is extra safe for your skin. Your finished dildo is made from a completely safe silicone-like material that is hypoallergenic & non-toxic.Unlike plain silicone, it WILL NOT break down when used with water-based OR silicone-based lubricants.
The first step in the kit is to have all the products layed out so that when your husband is hard, he can insert his penis in to the mold. Making the mold is quite easy. First, you must use the container that it is in to insert your penis, but first you must cut it down to size. For a perfect measurement, you must be hard. Cut the amount needed so that your penis fits perfectly into the container. (If you have a penis larger than 9 inches you will need to buy more rubber at the website www.cloneawilly.com). You must then put some sort of tape against the edges of the container that was just cut because if not it will cut your skin. Mixing the solution for the mold is quite easy, although you have exactly two minutes from the time that you mix it to insert your hard penis, if not the mold will solidify and become useless.
To make the mold, you must mix the powder with 1 1/4 cup of water. If you are like my husband and don't think that you have to have that exact amount, you are wrong and you will ruin the product and you will have to buy another. After you mix, you insert your penis, wait about 5 minutes and then proceed to pulling out. For the best results, let the gel sit for about 2-10 hours so that the clone does not come out bubbly. the clone will look like a clone of your own, but it will have small bubbles that are easy to remove, but they look distasteful.
Once your mold is set, mix the liquid rubber with the skin colored mixture and insert into mold. once the liquid rubber is in the mold, insert the vibrator into the liquid rubber. The clone will not shrink at all when it cures. Wait 24 hours, and your clone is ready.
Yes, that is the directions for the product, which i think is useful to know before hand, rather than to buy the product without any knowledge of the directions. This is not very easy to do if everything is not measured properly, or if you take too long to follow the directions.
About the actual Clone, well its exciting. Very enjoyable. We use this toy during foreplay and also during sex. This is an amazing toy for double penetration, the thought of having my husband inside both holes excites me the most. The vibrations are amazing, it only has one setting, but it feels great. The clone is very realistic. The color may not be as realistic as it should be, considering everyone's color differs. The only material that comes in contact with your skin during the molding process is a molding powder made from seaweed so it is extra safe for your skin. Your finished dildo is made from a completely safe silicone-like material that is hypoallergenic & non-toxic.Unlike plain silicone, it WILL NOT break down when used with water-based OR silicone-based lubricants.
Experience
My husband, love him to death, but he didn't get it right. The first time we bought the kit, we were so excited. I did all the directions right but the rubber never set. We took it back and we were told the kit had expired. We were given a new one. The second time, he did everything by himself. Sadly he didn't think correct measurement was needed and we ended up with, a hard mold in two seconds. He wasnt even able to put is erection in. The third and final time, we tried again, it worked. Now I can enjoy an exact replica of him, whether he is home or not. I absolutely love this toy. When my husband is at work, he isn't really gone :)
This content is the opinion of the submitting contributor and is not endorsed by EdenFantasys.com
About author
Reviewed by
Samanti
(Eden Advanced reviewer) An orgasm a day keeps the bitchiness away
wrote 20 reviews
This review was edited by
-
Alan & Michele
- Edited reviews: 521
- Graduated students: 30
Forum
-
Clone-a-willy construction!
-
I read a review where a man made a few of these single-handedly (hats off!). Instead of just placing the plastic tube over his penis, he cut off the closed end of the tube, sat down leaning back and poured in the mold, making sure it covered his entire length.
This actually seems to make more sense, provided you protect whatever it is you're sitting on, as there might be less fumbling about with timing and overflow of contents.
Has anyone tried it this way with more success? Any opinions? I read a review where a man made a few of these single-handedly (hats off!). Instead of just placing the plastic tube over his penis, he cut off the closed end of the tube, sat down leaning back and poured in the mold, making sure it covered his entire length.
This actually seems to make more sense, provided you protect whatever it is you're sitting on, as there might be less fumbling about with timing and overflow of contents.
Has anyone tried it this way with more success? Any opinions? :) -
Quote: I read a review where a man made a few of these single-handedly (hats off!). Instead of just placing the plastic tube over his penis, he cut off the closed end of the tube, sat down leaning back and poured in the mold, making sure it covered his entire length.We had one, and used the tube. My hubby is rather "gifted" in his length as well as girth, so in some parts of the dildo, the material was very thin near the bullet. I would suggest that if you do do one, don't put the bullet in.
This actually seems to make more sense, provided you protect whatever it is you're sitting on, as there might be less fumbling about with timing and overflow of contents.
Has anyone tried it this way with more success? Any opinions? I read a review where a man made a few of these single-handedly (hats off!). Instead of just placing the plastic tube over his penis, he cut off the closed end of the tube, sat down leaning back and poured in the mold, making sure it covered his entire length.
This actually seems to make more sense, provided you protect whatever it is you're sitting on, as there might be less fumbling about with timing and overflow of contents.
Has anyone tried it this way with more success? Any opinions? :) -
Hmmm, this is interesting. My boyfriend and I want to get this and the only thing we're worried about is that it won't work properly and we'll have to buy another one. This seems like a good technique. We'll try it out and I'll let you know :)
18 posts Read all -
Thank you for viewing Clone-a-willy kit – molding kit review page!
This is probably the best review you've done. Good job!
Thanks for all the warnings and tips! I have this too but my partner and I want to have enough time to do it correctly and haven't yet.
Thank you for your comments. But yeah this product is amazing if you do it in the correct fashion. Also, i should have added on here, it works best if both partners are helping each other. Staying hard for the man may be a bit difficult considering its not very sexy. having him watch a pornographic video or even lending him a helping hand may do the trick. But yeah, I had much experience with this product, did it three times
This looks pretty fun to try
Thanks for the review!
Definately fun. Thank you Sammi.
Sorry, i meant definately fun, thank you Samantha, I was looking at the comment before mine, i dont know if anyone calls you Sammi. Sorry about that. Great Review also. Man i should be quiet.
Nobody calls me Sammy, except my little brother. But yeah thank you for the comment Allen Wingate. Oh and It is alot of fun to try. But like i said, be careful.
Haha, too bad it too you two so long to get it right!
Great review, thanks for all the tips and warnings of what not to do.
glad to know this works! hope to try it soon
Third times the charm!
Does the package have an expiry date printed on it?
ive heard mixed reviews for this
Thank you for the review !
Thanks for the review!
Excellent review!
Thanks for the review!
~Nice Review