Very fun to make and use!
The Clone-A-Willy is very fun to make with your man! The results are incredibly detailed. You will feel like your man is there with you on nights when he cannot be. The directions are very clear, though some steps are complicated. I definitely recommend this product to anyone who ever misses their man and his penis!Published: April 21, 2011
Pros:
The directions were very clear and helpful, and the end result is very fun!
Cons:
It takes a while to make, and if you mess up, you cannot fix it.
The Clone-A-Willy is great for long distance relationships, nights without your special man, or extra fun for you and your man. The detail is amazing. It is truly an exact replica of his penis. It makes a fun little project for couples!
Making the Clone-A-Willy is easy with the very clear directions. Some steps are very specific, so make sure you read the directions through completely before beginning. It takes about 24 hours to set completely, so be sure to plan ahead, too. It is very fun to tease your man and get him hard for the mold!
It is a good idea for your man to shave, wax, or trim his pubic hair before making the mold, as it can get stuck. If it does stick to his hair, it is easy and painless to remove, but you may damage the rim of the mold. The end product is fun to use and easy to clean. The vibrations are very strong. You might want to play with it while the mold is setting!
It is fun to use the Clone-A-Willy alone and with your man! You can use it when your man isn't around, or you two can have some fun with double penetration. Or he can just sit back and watch you have some fun with it. It is a nice dildo for couples, because it is very personal. It is exactly like your man's penis, so you both know he is pleasing you.
I personally enjoy using it while on the phone with my boyfriend. He is in school across the country, so we only get together every few months. The Clone-A-Willy definitely keeps me satisfied in between visits. We had a lot of fun making it together, and we plan to have a lot more fun with it in days to come.
Making the Clone-A-Willy is easy with the very clear directions. Some steps are very specific, so make sure you read the directions through completely before beginning. It takes about 24 hours to set completely, so be sure to plan ahead, too. It is very fun to tease your man and get him hard for the mold!
It is a good idea for your man to shave, wax, or trim his pubic hair before making the mold, as it can get stuck. If it does stick to his hair, it is easy and painless to remove, but you may damage the rim of the mold. The end product is fun to use and easy to clean. The vibrations are very strong. You might want to play with it while the mold is setting!
It is fun to use the Clone-A-Willy alone and with your man! You can use it when your man isn't around, or you two can have some fun with double penetration. Or he can just sit back and watch you have some fun with it. It is a nice dildo for couples, because it is very personal. It is exactly like your man's penis, so you both know he is pleasing you.
I personally enjoy using it while on the phone with my boyfriend. He is in school across the country, so we only get together every few months. The Clone-A-Willy definitely keeps me satisfied in between visits. We had a lot of fun making it together, and we plan to have a lot more fun with it in days to come.
This content is the opinion of the submitting contributor and is not endorsed by EdenFantasys.com
About author
This review was edited by
-
DeliciousSurprise
- Edited reviews: 137
- Graduated students: 3
Forum
-
material safety and cleaning?
-
I'm curious about the "rubber" material and how body safe it is.
Also, what's the best thing to use for cleaning? -
link
You'll find most of the information you need there. You should also look at the reviews first to answer your questions before resorting to the forums. Good reviews will have this information and more.
From now on, whenever you want to know about material safety and its cleaning methods, etc., click on the material (or materials) link on the product page. It's usually on the top left of the webpage but this one is in the middle, for some reason, but there will always be a material safety so just look on the product page somewhere to find it.
2 posts Read all -
-
Curious
-
Is the dildo it makes hollow or solid?
-
Quote: Is the dildo it makes hollow or solid?SOLID ;) with a vibating bullet too!
-
I was wondering this as well, thanks!
4 posts Read all -
-
clone a willy
-
Tis Item is great. My husband and I use this item all the time, one in one door one in the other
-
Quote: Tis Item is great. My husband and I use this item all the time, one in one door one in the otherThanks for sharing!
-
This kit kind of freaks me out a little, actually.
8 posts Read all -
-
Clone-a-willy construction!
-
I read a review where a man made a few of these single-handedly (hats off!). Instead of just placing the plastic tube over his penis, he cut off the closed end of the tube, sat down leaning back and poured in the mold, making sure it covered his entire length.
This actually seems to make more sense, provided you protect whatever it is you're sitting on, as there might be less fumbling about with timing and overflow of contents.
Has anyone tried it this way with more success? Any opinions? I read a review where a man made a few of these single-handedly (hats off!). Instead of just placing the plastic tube over his penis, he cut off the closed end of the tube, sat down leaning back and poured in the mold, making sure it covered his entire length.
This actually seems to make more sense, provided you protect whatever it is you're sitting on, as there might be less fumbling about with timing and overflow of contents.
Has anyone tried it this way with more success? Any opinions? :) -
Quote: I read a review where a man made a few of these single-handedly (hats off!). Instead of just placing the plastic tube over his penis, he cut off the closed end of the tube, sat down leaning back and poured in the mold, making sure it covered his entire length.We had one, and used the tube. My hubby is rather "gifted" in his length as well as girth, so in some parts of the dildo, the material was very thin near the bullet. I would suggest that if you do do one, don't put the bullet in.
This actually seems to make more sense, provided you protect whatever it is you're sitting on, as there might be less fumbling about with timing and overflow of contents.
Has anyone tried it this way with more success? Any opinions? I read a review where a man made a few of these single-handedly (hats off!). Instead of just placing the plastic tube over his penis, he cut off the closed end of the tube, sat down leaning back and poured in the mold, making sure it covered his entire length.
This actually seems to make more sense, provided you protect whatever it is you're sitting on, as there might be less fumbling about with timing and overflow of contents.
Has anyone tried it this way with more success? Any opinions? :) -
Hmmm, this is interesting. My boyfriend and I want to get this and the only thing we're worried about is that it won't work properly and we'll have to buy another one. This seems like a good technique. We'll try it out and I'll let you know :)
25 posts Read all -
Thank you for viewing Clone-a-willy kit – molding kit review page!
Good first review! Welcome to reviewing
What materials is the kit comprised of?
Thanks for the review! Like LingaLoo, I'm curious what this kit is made of---both the mold, and then what you make the 'clone' with.
And how does the finished product feel? Is it firm or floppy? Can you make a base?
Thanks for the review! I'd be curious to see how this turns out.
Welcome to Eden!
Thank you for the review !
Thanks for the review
Thanks a lot!
TY!
Thanks for your thoughts on this item.