Double up harness - g-string by ASLAN Leather - review by Eva Schwaltz

This is a strap-on harness from Aslan Leather that has some awesome features. First off, it is a G-string style harness, so it won’t be the most comfortable for men to wear. Since it is a G-string, there is only one strap that goes between the legs. However, this strap has two layers of leather. The inner layer has two holes in it so the wearer can use a dildo and a butt plug at the same time, and the external strap will help hold them in place.

In total, this harness will hold three toys: one for the receiver, and two for the wearer. Part of the fun is deciding what should go where.

The straps are made of leather, and the O-rings and buckles are metal. You’ll want to carefully paint on some clear nail polish on the metal parts to prevent rusting.

When you first get it, the leather is quite stiff. The insides of the straps are quite rough, so getting a good leather conditioner is a good idea. You’ll also want to work the leather back and forth a few times to soften it up.

This harness is extremely well made, and very sturdy. It comes with a leather panel that snaps into place over the front dildo hole, the one you use for penetrating your partner. This panel can completely come off, or you can flip it over to use as a barrier if you don’t like the base of the dildo to rub up against your body. Keep in mind that if used as a barrier, it will cover one of the internal holes.

It is also extremely adjustable. There are buckles on either side, and the strap between the legs also buckles in the back. I have the medium harness which has 11 holes for the buckle on either side. The strap between the legs has four holes to adjust the length.

This harness is very compact and light weight. You can wear it under clothing and it is hardly noticeable. The straps around the waist are 1 ¼”, and the middle strap is 1” at the narrowest part.

This harness will be able to accommodate a large variety of sizes. Laid flat with the buckles fitted to the largest setting, it measures at 20” across. When the buckles are fitted to the smallest setting, it measures at 14” across. I am a size 4, so I wear this at the third smallest setting on each side. With this in mind, the harness will easily fit those who are a size 0. If you are concerned about this being too small, it’s available in a larger size.

The middle strap can adjust to four different lengths to help line up the internal holes with your anatomy. Everyone’s anatomy is different, so there’s always the chance it won’t work for you. I have to adjust it to the smallest setting in order for everything to line up properly, but this pulls the back part of the harness down, which doesn’t bother me, but it might not feel right for others.

This harness is very stable. If you wear it nice and snug, which you can, it will be just as stable as a jock style harness. For putting in dildos, I recommend putting the dildo in place before putting on the harness because once the harness is on, it is pretty difficult to put in or remove a toy.

This harness really stands out because the wearer can strap in one or two toys. All you need to do is separate the layers of leather, and slide a dildo or plug into place. The holes for the wearer are ¾” of an inch apart, so if you decide to use a dildo and a plug at the same time, the bases might interfere with each other if they are fairly large.

The large hold in the front of the harness, where the external dildo goes, is 5 1/2” in circumference. It is just a hole in the leather, which is bad if you like to have the ability to change different sized O-rings, but it’s good for stability. As mentioned before, there are two holes for the wearer, the one closer to the front of the harness is 4” in circumference, and the one behind it is 3 ½” in circumference. The wearer can still insert toys without having to place them in the strap, especially if the holes are too small.

Since this is made of leather, you’ll need to spot clean with a damp cloth and pat dry. Do not submerge it in water.

Keep it stored away from sunlight and wet areas. It comes packaged in a zip loc bag. Simple, and works well for storage, but I keep mine stored in my toy chest. The harness has a tag that talks about Aslan’s lifetime guarantee, so if it gets damaged, they will repair or replace it for you. Make sure to keep the receipt.