Sasha harness red - panty harness discontinued by SpareParts HardWear - review by Mr. & Mrs. Peg

Sasha is nothing if not classy. Sasha comes in a black gift box that is devoid of any markings. All the product information is on a cardboard sleeve that slides over the box. This makes it both suitable for gift giving and, if you slip off the sleeve first, a wonderful surprise for Valentine’s Day or another special occasion. Once you open the box, Sasha is lying inside neatly folded and ready for play. Inside the box are also a handy lingerie mesh laundering bag, four removable garters, and a storage bag made out of the same luxurious material as the harness itself. The storage bag has a zipper closure and an inner pocket with metal button clasps to store a bullet vibe, the garters, or any other small items you may want to put in there. On the outside of the pouch is a little black bow. I am always impressed by the attention to detail that SpareParts put into their products, and with Sasha they have truly outdone themselves.


Sasha, itself, is absolutely gorgeous; ours is red. It isn’t a bright red, but rather a deep sensuous red with removable black garters, black trim around the leg openings, and a little black bow on its waistband. Sasha is a booty short harness that has a retro style to it, being a little tall from the top of the leg opening to the top of the waistband, but it is not quite a boyshort. There are ribbons on the sides which should be tied into bows for an added touch of refinement. The genius of these ribbons, however, is that they are in channels that allow you to scrunch up the sides so the cut on the hips is higher if you prefer. If you want a smooth side, simple loosen the bow and the sides flatten right out for a sexy fit. My absolute favorite detail, and what absolutely knocked me out when I saw Mrs. Peg wearing Sasha, is the runched backside. I have a bit an obsession with my wife’s perfect ass and I honestly didn’t think anything could make it look any sexier than thong. I, happily, stand erect and corrected!


The o-ring for the dildo is of the same construction as our other SpareParts harnesses. It is incorporated into the harness, but it stretches to accommodate dildos anywhere from 1.25 to 2.25 inches in diameter. If you are having difficulty fitting a thicker dildo into a SpareParts harness, simply slip a plastic bag over the dildo prior to inserting to help it slide in. Once the dildo is seated in the o-ring, continue to pull the bag all the way through. Viola! We have yet to wear out the stretchiness of the SpareParts o-ring…another testament to the quality of their products.


The placement of the dildo is spot-on with the base resting on top of the pubic bone. This gives it a natural feel and makes it perfect for vigorous thrusting. Behind the o-ring is a double-layered panel. Once the dildo is inserted, these panels cover the base providing a barrier between the wearer’s skin (and pubic hair) and the dildo’s base. This can, much like the fly on a man’s pair of tighty-whities, open if the wearer wants the base pressing up against them. This also allows for the use of double ended dildos like the Feeldoe, the Share XL, or any other similarly styled double-ended dildo. There is also a small pocket in the crotch of Sasha into which a bullet vibe can be placed to give the wearer an extra little buzz.


Because Sasha is a booty short harness, there are no buckles or straps to adjust. This has its benefits. First and foremost, it is easy to slip on and start pegging without having to fuss with a lot of adjustments. It can also be worn under clothes as a panty until you are ready to slide in a dildo and get to work (a very VERY hot idea!). The flip side is that fit is very, VERY important. If properly fitted, Sasha will securely anchor the dildo, an absolute must for the enjoyment of both the pegger and the peggee. The fabric is 77% nylon and 23% spandex, so it does have some give to it, but it is not adjustable. We highly recommend reviewing this the SIZING GUIDEto ensure a proper fit. Mrs. Peg’s waist is 32.5 inches and going down a size to a small was both comfortable and a perfect fit. You do not want this harness to be too loose.

Being a fabric harness, Sasha is also suitable for playing in or around water. While we did not use Sasha in the shower, we have used other SpareParts harnesses this way for some extra wet fun. Sasha can also be easily washed. SpareParts recommends hand or gentle machine washing, with a low temp tumble dry or laying Sasha out flat to dry. You just can’t do that with a leather harness! SpareaParts also cautions that only water or silicone based lubes be used. Oil based lubes will definitely stain the fabric and may cause the elastic and spandex to degrade. Just make sure whatever lube you use is compatible with your toys!

We absolutely love this harness. Between its ease of use, superior effectiveness, and scorching hot looks, there is nothing not to love.