There are 2 different materials used in the Eve Rechargeable Masager, silicone and ABS plastic.
The top of the toy (the pink surface), is the portion of the toy that is ABS plastic. ABS plastic is non-porous, hypoallergenic and Phthalate-free. This part of the toy is hard, smooth, and free of texture.
The opposite side of the toy (the black surface) is made from silicone. Silicone is non-porous, Phthalate-free and hypoallergenic. This silicone is smooth and glides across the skin easily. On one corner of this surface there are 6 slightly raised ridges, providing a small amount of texture for stimulation.
There is no taste or odor to the toy.
Overall, the toy has a very firm feel to it. The side that is made of plastic is firmer to the touch, but the side that is silicone is also very rigid as well and feels like a very thin layer of silicone on top of plastic. The toy can not be bent or flexed in any way.
This toy is small and discreet. It's oblong, almost shaped like a leaf. It's very lightweight, 3 inches long
and 1 1/2 inches in height. This toy would work very well for travel, and can be hidden easily.
There are two sides and two materials on the toy. The pink side is made from ABS plastic, and is smooth and texture free. There is a seam that runs through the center of this side of the toy, and this side of the toy id concave. "Eden" is printed in silver lettering along one edge of the toy.
The black side of the toy is coated in silicone. The shape of this side of the toy in convex in appearance. On the corner of one side there are 6 textured slightly raised ridges that could provide a bit of texture. The operating buttons are located side by side in close proximity of one another and are built in to the silicone surface of the toy. On the opposite side of the silicone surface, there is a small circular area where the charger gets inserted.
The vibrations carry throughout the toy, and any part of the surface could be used for stimulation.
The Eve Rechargeable Massager is charged through a USB charger. The tip of the charger is inserted into an area of the toy. The USB end may then be plugged into the USB port on your computer, or through any USB compatable wall adapter to charge. There is a small red LED light between the (+) and (-) buttons on the toy. The light blinks continuously during charging at one second intervals. When charging is completed, the light will glow a steady red. Both the maximum charging time, and usage time (time that you can operate the toy between charing) is 2 hours. The toy is operated by a (+) and a (-) button, which are built into the vibrator and are raised from the surface . To turn on the toy, hold the the (+) button down for 2 seconds and the toy will begin to vibrate.
The (+) button takes you through the massager's settings which are as follows:
1. Steady vibration at a medium intensity2. Steady vibration at a high intensity
3. Bursts of vibration at medium/high intensity with a pause in between
4. Faster paced bursts of vibration at medium/high intensity with a short pause in between
5. Escalating vibration, going from low to high intensity
6. Escalating vibration, low to high intensity, followed by high to low intensity
7. A blend of escalting vibration, both low to high and high to low, with bursts of steady high intensity vibration at varying lengths
Pressing the (+) button an additional time after cycling through the functions turns the toy on a "standby" mode which is indicated by the red LED light between the buttons blinking at one second intervals. The "standby" mode allows the toy to be operated again without having the toy turned off.
Using the (-) button during use of the toy takes you to the previous mode. You can also use the (-) button to turn the toy off in any mode by holding it down firmly for 2 seconds. Before turning off the LED light blinks quickly 3 times.
Since a portion of the massager is made of silicone, water-based lubricant should be used with this toy. Silicone lubricants have potential to damage the silicone on the toy. It should also be stored away from other silicone toys and in a cool, dry environment. Do not store the toy in direct sunlight, and avoid overheating.
While this toy is splash-proof, it is not fully waterproof and should not be submerged for cleaning. A quick rinse with soap and water, toy wipes, and toy spray, or a thorough wipedown with a damp rag are the best cleaning options for the Eve massager. Due to mechanical elements and the fact that this toy is not fully waterproof, it can not be boiled or placed in the dishwasher for sanitation. As a precaution to prevent potential damage, it is reccommended to make sure the toy is turned off before cleaning.
The massager, USB charger, and user manual/instructions were simply packaged in a plastic bag.
For me, this toy did not perform that well. I had high expectations; I loved the design, the fact that it was rechargeable and that it had multiple functions. The first thing that I was dissapointed in was the material. I was expecting a silicone toy, as that was what the toy was labeled as. This wouldn't have been a total dealbreaker for me, as ABS plastic is a quality body-safe material for sex toys. However, the weight of the toy (it's very light and hollow feeling) made the vibrations feel like buzzy surface vibrations that traveled more through my hand than on my clitoris. The vibrations are pretty evenly dispersed throughout the toy, and I was desperate to find an angle that would really work for me, but sadly never found it.