Rider luxe harness Strap on harness

Who is this strap-on harness for?
Rider Luxe is a good starting point for someone who wants to try strapon play or simply wants a reliable classic harness with an adjustable fit.
The setup is straightforward: a compatible dildo, an O-ring mount and buckles to bring everything close.
It suits couples exploring giving, receiving or taking turns.

What dildos work with this O-ring harness?
The dildo holder measures 1.75" in diameter.
Choose a harness-compatible dildo with a shaft that fits the opening and a suction cup base that stays behind the mount.
Check the shaft's diameter at the point where the ring will hold it.
Test the hold before using it with your partner, and don't force an oversized dildo through the ring.

How do I put my dildo into this harness?
1. Undo the small fastenings on the straps around the O-ring to release the ring.
2. Slide the dildo's shaft through the 1.75" ring, tip first, until the ring rests just in front of its broad base.
3. Position the base behind the mount, with the shaft pointing outward. The base stays behind the ring; don't try to squeeze it through.
4. Secure the short straps around the O-ring again, checking that every fastening is fully closed.
5. Give the dildo a gentle tug. The base should stay behind the mount without slipping through.

How do I put on this strap-on harness?
1. Attach your compatible dildo, then loosen the waist buckles.
2. Step into Rider Luxe and settle the front panel against your pubic area, with the dildo pointing forward.
3. Position both rear straps comfortably across your cheeks. Smooth out any twists and check that nothing pinches.
4. Adjust the waist buckles until the panel follows your hips without digging in.
5. Try a few gentle hip movements and check the toy's hold before applying lubricant and starting play.

Will this strap-on harness fit me?
Rider Luxe accommodates a maximum hip circumference of 50".
Measure around your hips with a soft measuring tape and compare that measurement with the listed maximum.
The buckles let you adjust the belt for a closer fit. Check that both rear straps feel comfortable, too.



What positions are easiest for first-time strap-on play?

Missionary: gives you room to communicate face to face and guide the dildo by hand.

Receiver on top: lets the receiving partner choose the depth and pace.

Side-lying: supports both bodies and makes smaller movements easier.

Guide the dildo into position with your hand first, then let your hips take over.

Can we keep this double strap harness on for other play?
Aside from the obvious foreplay and oral play. the open back leaves room for touching, kissing and enjoying the view while the harness stays on.
It's easy to pause the thrusting and give each other some attention.
Depending on the activity, you may need to move a strap aside or remove the harness for comfortable access.

How do I clean this faux-leather strapon harness?
Remove the dildo and wipe Rider Luxe with a soft, damp cloth and mild soap.
Use a clean damp cloth to remove soap residue, then let it air-dry completely.
Dry the hardware carefully.
Avoid soaking, machine washing, or using strong cleaners on the faux leather.

How should I store this strap-on harness?
Keep Rider Luxe dry and separate from the dildo.
Lay the front panel flat and leave the straps loosely arranged.
Avoid sharp folds, direct heat and anything that could scratch the faux leather.