Bunny Harness Vibrating strap on

Who will like the Bunny Harness vibrating strapon the most?
Mainly, this is a dream vibrating strapon for WLW couples - it's the icon of pleasure for the woman's body, plus a mounted position on your partner's hips.
One partner wears and guides the rabbit strap-on while the receiving partner feels the rotating shaft, rolling beads and clitoral vibration.
It brings the familiar sensations of a rabbit vibrator into something you can move through together.
But honestly, all couples can enjoy it. Rabbit vibrators are famously good for prostate stimulation, and in this strapon setup, it'll make a great pegging plaything, especially for those who like pernieal stimulation, too.

Does the person wearing the harness feel vibration too?
The moving shaft and rabbit arm are designed to stimulate the receiving partner.
The wearer controls their position and pace and may notice some vibration through the attachment, but there's no separate vibrating part designed for the wearer's body.

How to use this vibrating strap-on?
1. Adjust the brief-style harness so the shaft points forward and stays steady.
2. Apply plenty of water-based lube, guide the shaft in slowly, and check where the rabbit arm meets the clit.
3. Then turn on a pattern and begin with small hip movements.
4. Pause to adjust the angle whenever you need to.

How to keep the rabbit arm focused on her clit?
Start with the harness snug at your hips and take time to find the angle before moving faster.
Shallow movements may help the arm maintain contact.
If it slips away, pause and adjust the harness or your position rather than pressing harder.

What do the massage beads do?
The bead rows sit around the lower part of the shaft.
Their position against her body depends on how deeply the shaft is inserted, but they can massage either her entrance or deeper, nearer to the G-spot.
Try smaller movements and adjust the depth until the rolling sensation lands where she likes it.

Does the shaft rotate on its own?
Yes. An internal rod drives its circling motion while the bead rows turn near the shaft's base.
The rotation continues when the wearer holds still; moving your hips adds penetration at the pace you choose.

Can we use rotation and vibration separately?
The 7 patterns pair rotation and vibration.
The wired remote lets you change their shared rhythm.

What positions work best with this rabbit strap-on harness?
Start with the receiving partner straddling the wearer.
She can lower herself slowly, choose the depth, and shift until the rabbit arm rests against her clit and the beads sit near her entrance.
Face-to-face with the wearer on top is another good option.
Try short, rocking movements to keep the rabbit arm in contact while the shaft rotates inside.

Will Bunny Harness fit me?
The waist diameter ranges from 10" to 17", and the thigh diameter from 9" to 13".
Check those measurements against your fit, then adjust the harness so it stays in place without digging in or pulling the shaft off angle.

Does Bunny Harness need charging?
No. The controller runs on 4 AAA batteries, which are not included.
Keep a fresh set handy so you can replace them when the motion starts to slow.

What lube should we use with the TPR shaft?
Use plenty of EdenFantasys water-based lube on the shaft and add more if you feel friction.
It's a simple choice for the TPR surface.

How do we clean Bunny Harness?
Switch it off and remove the batteries.
Wipe the shaft, bead area and rabbit arm with a damp cloth and mild soap or EdenFantasys toy cleaner, paying attention to the spaces around the moving parts.
Wipe the harness as needed and let everything dry fully.
Keep the wired controller out of water.