Ripple Dipper Suction cup dildo

Who is this textured suction cup dildo for?
Ripple Dipper suits someone who enjoys a classic dildo with noticeable texture and wants to guide pressure with a curved tip.
If you want something in between of a dildo and anal beads, this might be a great choice.
This silicone dildo works for handheld thrusts, hands-free riding or sharing with a partner in a compatible harness.

Is this textured silicone dildo beginner-friendly?
It can be, if you're comfortable with its size.
The ridges make the contact more noticeable than a smooth shaft.
Use plenty of water-based lube and begin with slow, shallow movements.

How do I use this suction cup dildo?
1. Apply EdenFantasys water-based lube to Ripple Dipper and yourself. Start slowly, then explore a comfortable setup:
2. Handheld: Lie on your back with your knees bent, or on your side. Hold the base and make small angle changes to guide the curved tip.
3. Mounted for riding: Secure it to a suitable firm, low surface. Keep your knees supported and lower yourself gradually, controlling the depth.
4. Mounted on a wall: A smooth tiled wall gives you another mounting angle as you back into it. Check the suction first and keep your footing steady.
5. With a partner: Your partner can hold the base to thrust the dildo inside you or wear it in a compatible harness. Let them know which angle, pace and depth feel comfortable.
Slow strokes make the individual ripples more noticeable. Small rocking movements let you keep steadier pressure from the curved tip.

How do I use this curved dildo for G-spot stimulation?
During vaginal use, point the curve toward your front vaginal wall, in the direction of your belly button.
Begin with shallow placement and gently tilt the base. Small adjustments can change where the tip presses.
Comfortable contact matters more than using the full length.

Where do I set up this suction cup?
Choose smooth tile, glass or another flat, nonporous surface. A mirror would work, too, as long as it's firmly secured.
Clean the surface and suction cup, press the entire base down, then give it a gentle tug to check the seal.
Keep the rim clear of grout lines. Fabric, textured walls and unfinished wood won't give it a reliable hold.

What should I do if the dildo's suction cup slips?
Stop and release the base by lifting its edge.
Clean away lube or soap, then press it onto a suitable surface again. Check that the whole rim lies flat.
Pulling sharply sideways can break the seal. If it keeps shifting, change surfaces or hold the base.

Will this suction cup dildo fit my strap-on harness?
It needs an opening that fits snugly around the shaft near its base, with the flared base held behind it.
Check your harness's sizing to make sure the Ripple Dipper's girth fits the O ring.

Can I use this textured dildo anally?
Yes, for anal play and for prostate pressure, this would work beautifully.
Its wide, flared base provides an external stop and must stay completely outside your body.
Use plenty of water-based lubricant.
Go slowly, since both the girth and raised texture can feel pronounced. Stop if anything hurts.
Clean the dildo thoroughly before switching from anal to vaginal use, and change condoms if you're using one.

Can I use this silicone suction cup dildo in the shower?
Yes. This nonpowered silicone dildo can get wet.
Choose a smooth mounting surface, check the suction and keep your footing secure.
Soap can make the surface slippery and weaken the hold.

What lubricant should I use with this silicone dildo?
EdenFantasys water-based lube is our favorite choice.
Spread it over the ridges and add more if movement starts to drag.
Keep it off the suction cup and mounting surface.

How do I clean this textured silicone dildo?
Wash Ripple Dipper before and after use with warm water and mild soap or EdenFantasys toy cleaner.
Clean carefully between the rounded ridges and underneath the suction cup.
Rinse thoroughly and let it dry completely.

How should I store this suction cup dildo?
Keep Ripple Dipper clean and dry in its own pouch or compartment.
Let the shaft rest naturally.
Avoid leaving it bent or storing heavy objects on the suction rim.