advice on removing a stuck bullet?

Contributor: Taylor Taylor
So I bought a Tantus Flex not too long ago and my partner put a bullet in the hole, but not the bullet that came with the toy. He pushed it in all the way and now the bullet is stuck. There is only a little bit sticking out so I can't get a good enough grip to pull the bullet out. Does anyone have any ideas on how to get it out without ruining the toy or the bullet? I've been trying to get that sucker out for about a week now.
02/23/2012
  • Save Extra 50% On Sexobot Attachment
  • Long-distance pleasure set for couples
  • Upgrade Your Hands-Free Play!
  • Anal Sub Hook&Rope Kit for $28.99 Only
  • Complete strap-on set for extra 15% off
  • 1
  • 2
  • 3
  • 4
  • 5
All promotions
Contributor: Nazaress Nazaress
Have you tried using a really slippery lube? That is the only advice I can think of, though I'm sure someone who is more knowledgeable will come along and give you better advice.
02/23/2012
Contributor: Jul!a Jul!a
Is there enough sticking out that you can grab it with a pair of pliers? If you're careful, you can grip it enough to wiggle it out, the same way you might "walk" a stuck ring off of a finger.
02/23/2012
Contributor: Kindred Kindred
I would try pliers as Sam suggested, but be careful not to crush the bullet. Another option with the bullet is to unscrew the cap and grab the lip with pliers.

Other things you could try:

-Try to break the vacuum seal by inserting something like a paper clip along the side of the bullet as you try to pull it out.

-Lube may help, but be careful that you don't get any on the part sticking out or else grabbing it will be even harder.

-Not sure how firm the Flex is, but maybe have one person squeeze the bullet from the bottom while the other pulls?

-Only other thing I can think of is to freeze the dildo and make the silicone firmer. It may make it easier to remove the bullet.
02/23/2012
Contributor: Positwist Positwist
Quote:
Originally posted by Kindred
I would try pliers as Sam suggested, but be careful not to crush the bullet. Another option with the bullet is to unscrew the cap and grab the lip with pliers.

Other things you could try:

-Try to break the vacuum seal by inserting ... more
I'd be careful about freezing. I'm not sure, but making it firmer might increase the risk of cracking the dildo.
02/23/2012
Contributor: Kindred Kindred
Quote:
Originally posted by Positwist
I'd be careful about freezing. I'm not sure, but making it firmer might increase the risk of cracking the dildo.
Admittedly I've never frozen a dildo, but I'm pretty sure silicone won't freeze that hard to come close to cracking.
02/23/2012
Contributor: Mr. E Mr. E
Have you tried squeezing it out? If you squeeze the dildo firmly just before where the bullet begins you may be able to extract it.
02/23/2012
Contributor: Taylor Taylor
Thanks for the tips guys. I tried squeezing for quite awhile and it just didn't work. I think lube would have just made it worse because I could only get to like 1/4" of it. I finally tried pliers and got the bullet out, but broke it in the process. That's fine with me though I have plenty of bullets. I am definitely NOT letting my parner put the bullet in next time. I don't want to go through this again.
02/24/2012
Contributor: charletnarouh charletnarouh
I've heard that putting some lube inside the hole before putting the bullet in makes it easier to remove the bullet later. Or just make sure you use a longer bullet next time!
02/25/2012
Contributor: Missmarc Missmarc
Quote:
Originally posted by Taylor
So I bought a Tantus Flex not too long ago and my partner put a bullet in the hole, but not the bullet that came with the toy. He pushed it in all the way and now the bullet is stuck. There is only a little bit sticking out so I can't get a good ... more
Try using dripping some olive oil into the gap between the vibrator and the silicone sleeves.
02/26/2012