Temperature play has always been something I have enjoyed. So when I saw this I knew I had to try it. There are two parts to this dildo. The core which can be frozen or heated and the sleeve. I didn't notice any chemical smells when I opened the package. I immediately cleaned the toy, put the plastic core into the freezer and sat around impatiently for 5 to 10 minutes. In the mean time, I kept myself occupied with the sleeve.

The sleeve is textured with raised veins which seem larger (taller) than some of my other toys. I was excited to see how they would feel. The head is solid yet soft which aids in insertion. The seams that run down the side of the shaft are conveniently concealed next to raised vein so they are unnoticeable during use. The instructions say 5 minutes in the freezer, but I got distracted and left the core in the freezer for 10. The liquid inside didn't freeze and the core was nice and icy cold. (note: I accidentally left it in the freezer overnight once and it still didn't freeze)

When I went to insert the core into the sleeve, I soon realized it was not going to go in without lube. A few drops of water based lube on the inside of the sleeve and the core easily slid in. It took a minute to get the air out so that the core sat at the head of the sleeve. I found that when I put the water based lube directly on the cold core, it became somewhat sticky and defeated the purpose. A few more drops on the outside of the sleeve and I was ready to play.

Insertion was comfortable. It's not too large and not too small. The core gives it the necessary stiffness for thrusting but the sleeve gives it a pleasant softness. At first, I didn't notice much of a temperature difference but the sleeve soon adjusted to the temperature of the core. It didn't get really cold but it was cold enough that it made my pussy nice and wet. It was a nice change from room temperature toys.

Cleanup was easy once I figured out how to break the vacuum created when you put the core in the sleeve with lube (hint: pull the core out half way then insert your finger down the side). The parts could then be washed with antibacterial soap/toy cleaner and water.

The instructions say it can be boiled for a few minutes and used for hot/warm but I have no desire to try that.

The sleeve for this toy also fits nicely over a cheaper classic vibrator for an added degree of sensation. I actually use it as much on a classic vibrator as I do on the core.