X5 Roxanna - realistic vagina and ass by Blush Novelties - review by AbbyLover

This tabletop or bed top pussy is great to get simulated sex. It’s complete with two different play holes. The pussy and anal hole are both textured in different ways. The anal hole is definitely tighter and is textured to simulate an actual anal canal and rectum. The simulation with both holes is super stimulating. If Roxanna is warmed to body temperature and lubed all up, I would say it’s the closest thing to the real action I’ve experienced thus far. If given a choice to self-care with or without Roxanna, I would choose Roxanna every time. Something about being able to thrust into something is more stimulating than moving a pocket pussy up and down my love shaft. If your boyfriend is opposed to anal, Roxanna could be a good way to convince him. Looking down at Roxanna while inside her is visually appealing. There is a realistic vision when looking down at Roxanna that is missing with pocket pussy’s.

Material is TPE and is a soft skin-like material. Her Butt is smooth and has a bounce when slapped. Inside, the pussy and anal hole are textured for realistic simulation. The butt hole inside is ribbed, the pussy is textured similarly. When unboxing, I had an experience of the smell of TPE outgassing. This is normal for most TPE products. Normally I avoid buying TPE because of the smell and life expectancy of the toys. I especially don’t like putting condoms on my toys. I personally don’t recommend TPE for internal insertion without a condom. But when it comes to tabletop pussy’s cost for a silicone toy can get expensive. Also, it worth noting that properly maintained TPE can be a more realistic feeling than silicone. Also, TPE of good quality is approved for prosthetics. But it’s also true that not all TPE is manufactured with the same quality as medical grade. To be fair, some silicone products are also not made to medical-grade. Roxanna is the exception to my materials preference. With some care and time, TPE can be fun! Roxanna was made from injection molding at high temperatures. Because of the size of the toy and its material/manufactures process, it has a heavy smell. I think it’s especially smelly because of the size of the toy and being trapped in a plastic case in a box. With much research on TPE, it’s been explained to me that the smell comes from the mineral oil that’s inside the plastic/rubber from the factory. This is normal and is technically safe given quality materials were used. Part of the Oder was from factory oil absorbed into the talc powder used to protect and preserve the toy. This powder is normal and is required to keep the toy in good condition. Factory powder is also common with latex gloves and other rubber products.

The first day of your TPE doll is the most important day. Initial conditioning starts with Washing the doll with mild soap and water. I also recommend washing the plastic tray and lid from the box as well. After washing, Oder should be dropped significantly. Pat dry with a cloth or paper towel. Once this is done, you will notice the material becomes sticky! This is normal. Once fully dry, apply a liberal amount of Vaseline. Leave toy coated in Vaseline for 12 to 24 hours. You will notice vaseline will adsorb into the toy. This is normal and is a great sign your conditioning is working. I recommend using two thick coats of Vaseline 12 hours apart for best results. If you're in a rush, baby oil can be used with less absorption time, approximately 2 hours. I personally prefer vaseline for this procedure because it’s a thicker oil and will better condition the TPE. Once absorption is complete, remove excess with a soft cloth. Baby powder or cornstarch is used next to condition material to be soft and skin-like. I personally like corn starch for this step because it’s safer/less risk for accidental inhalation. Once this step is complete, your toy is officially Conditioned and ready to stow or use.

TPE Rehydration
Once a month, it is recommended to hydrate the entire doll with mineral oil to keep the doll factory new. Similar to washing your doll, you apply baby oil on the body and wait approx 2 hours for absorption and flip the doll over and repeat. Be sure to remove baby powder first before oiling her body. Vaseline can be used under high-stress areas like her ass and vagina but requires approx 12 hours for absorption. Vaseline and Nivea creme have a higher mineral oil content than baby oil. For hydrating, baby oil is the faster choice. Be patient when conditioning; time is needed to absorb into the material. Once Rehydration is finished, wipe excess oil off from her and apply a lite coat of powder.

So to explain this process and its significance in reasonable terms. It starts in a factory where a hot mix of plastic, rubber, and mineral oil are melted together and then injected into a metallic mold of the toy. The mineral oil is always going to smell with hot injection molding. I understand it as the higher temperature mineral oil smells. The rubber also has a mild smell. Think fresh rubber gloves smell. This is in a scientific position called outgassing. Simply gas escapes the material and then finds its way into your nose, and you, therefore, can smell it. So washing it thoroughly with soap and water does two functions: removes factory powder and removes some mineral oil from inside the material. This makes the material very porous, like a sponge. Then when you apply oil, it’s absorbed into the material and “conditions it” at this point, the material is filled with oil. Now the powder absorbs the outermost layer of oil, making the material soft and smooth but some grip much like real skin. Once you understand this, know it’s okay to use water-based lubricant because you can’t get the lube to absorb into the oil-filled toy. But if you use oil-based lube, it will absorb into the toy; this is a problem because not all oil is compatible with TPE, or food oils can spoil. Mineral oil generally does not spoil.

This toy is a great life-size. I personally feel like the design of the toy is excellent. It’s sorta realistic but not too realistic. Having the holes pass-through makes it easy to clean and maintenance easygoing. I personally like the box to keep it stored and clean, and ready to play. The play holes are definitely accommodating to most all love shafts. It’s approximately 7-8 inches deep for vaginal and anal. I have successfully fisted her without any damage to the toy. Size is great for putting on a bed, table, or chair. It would fit into a standard backpack without its box.

This toy functions exceptionally well. I’ve noticed if you seal the bottom holes of the toy when in use, you can get a successful suctioning function that really steps up the sensations and makes fun noises. This hidden function really is excellent for the simulation of anal. It really reminds me of the real deal hearing the sloppy anal sounds.

The first thing is to clean the new toy. From the factory, Roxanna comes with a heavy coat of powder. This can be corn starch or talcum powder. This is going to be part of the smell out of the box. To wash the toy, a bathtub or large sink is ideal. Using a mild soap, wash inside and out of the toy. Never use hot water; anything below 110 is good. Never use anything other than mild soap to clean the toy. TPE is a porous product and will absorb cleaners or oils and will degrade your toy. After cleaning the toy for the first time, you essentially wash away some oil from the toy. Once it’s washed you want to dry it thoroughly. Do not use heat to dry. Only air dry or cloth pat dry. Once it’s all cleaned, it should smell much less like it did. You will notice it becomes sorta sticky at this point, don’t be concerned, this is normal. The next step is to coat your toy with petroleum jelly or unscented baby oil. Wait for the oil to absorb into the material 12 hours for jelly or 2 hours for oil. Once done, wipe excess oil or jelly. Then finish conditioning with corn starch powder. Only use mineral oil or water-based lube. Some oil-based lubes may not be compatible with TPE. Once you finished having your way with Roxanna to clean body fluids out, put one or two tampons inside the dirty hole. This will absorb the lube and body fluids* this is a tip and not required. Next, wash the dirty areas with mild soap water in a spray bottle and or a douche. Then rinse with fresh water. Then pat dry ensure all holes are dry before storing. Application of oil is recommended inside f**k holes to keep material conditioned. And protect from mold. Never store toys dirty or wet for long periods of time. Bacteria and mold can remove a TPE toy from your toy box.

Blacklist of harmful products

Alcohol:
Pure alcohol like rubbing alcohol, alcohol thinned with water, and products containing a lot of alcohol like baby wipes, disinfecting wipes, sprays and soaps, toy cleaners, etc. Alcohol produces micro-cuts (irreparable) and a dry-out effect (porous, cracked, and brittle ) inside the TPE structure.
Spray perfume only on clothing and/or wig before you put on your doll. Do not spray perfume directly on the doll's TPE surface.

Solvents:
All kinds of single solvents and solvent compounds like mineral spirits, odorless mineral spirits, paint thinner, nitro-thinner, and products containing solvents like alcohol-free baby wipes (includes ether and/or chlorine instead of alcohol), etc. Solvents will cause a dissolving process inside the TPE structure; this destruction of the block-copolymers is extremely harmful to TPE. Only official repair solvents for TPE dolls and their different TPE blends are allowed according to their repair manuals/videos and recommendations from the vendors and manufacturers.

Vegetable oil:
Products containing vegetable oil, like crèmes, soaps, shower gels with coconut oil, fruity oils, etc. Vegetable oils are sealing the TPE surface, and therewith the necessary breathing function of TPE is stopped.

Silicone oil:
Products like wet condoms (includes dimethicone) and silicone-based lube. Silicone oil influences the TPE structure and makes it harder, cracked, and brittle. Also, a shrinking process of the TPE can happen.

The box is kinda cool; it has a plastic window so you can see your future! I recommend keeping the box and plastic insert for storing the toy when not in use.

I’m personally a big fan of anal. I like giving and taking and everything in between. But I know some relationships, not everyone is interested in the same thing. I know if I don’t have anal for too long, I start to feel down about it. I could not think about what it would be like if my partner were against me using her dirty hole. There is a lot of people who are too scared to ask or try with their partner. But if you're the one who would love for your partner to open his mind to explore. This toy would be great to have him explore and get into the headspace to change their perspective. Just my opinion and optimism!

Ok, so a personal story about this toy. When It arrived in a big box from Eden, my partner asked what it was I said an Eden order. She instantly lost some interest, I guess she wasn’t in the mood for that stuff. Pulled Roxanna out and immediately my girlfriend was like ahhh it’s so big like life-size. She started to poke her butt cheeks, then the next thing I know she has her hand in and out of her pussy then she rubs her clit some and then fingers her asshole. And said do you think I can fist her? I responded with lube maybe. I was super surprised how she without hesitation started playing with her. I’ve never brought home toys that provoked my partner to instantly start playing with them. Days after my work conditioning Roxanna I had to try her out for a proper review ;-). Once my partner found out she was like, “I want you to use me as you do to Roxanna”. I should mention at this point that my partner isn’t always in the mood, so this was extra exciting for me. Then during intercourse, she said yea take what you want as you did to Roxanna. Afterward, she said you can put that in your review. So Roxanna spiced up my bedroom almost instantly.