Review of Bell nipple clamps - Nipple clamps discontinued

These fun little bell clamps are a neat introduction to nipple or clitoral clamping as well as clamping anything within reason that you might want to enjoy the fun; they're very versatile. As a lovely bonus, the bells add a nice bit of whimsy to these little titty torturers. The clamps are a tweezers style, with a small metal ring that you slide up the tweezers to tighten.

I say these are a good introduction to clamping as they accommodate most sized nipples. The tightening method allows for a moderate range of pressure to be applied. I felt after a few uses that I wanted more, but they were as tight as they could go. Maybe they are not a great choice for more experienced users but they are simply designed and can be used on many different parts of both the male and female anatomy. The only limits are your imagination and how wide you can stretch the clamp without breaking (which is about an inch for me).

For the price they're definitely a good place to start your clamping fun, or for lightening up your BDSM with some jingly bells.

Well let's see now, the majority of the clamps appears to be metal, whether or not these are stainless steel, I do not know, but they're a nice shiny metal nonetheless. On the top of the tweezers-like clamps, there are rubber tips. The rubber, where the clamp latches onto the nipple, is to prevent the pointy metal edges from stabbing your nipple. Unfortunately, the rubber tips slip off super easy and it's a miracle I haven't lost all of them yet. To further iterate my point, as I was taking the photos I lost one of the tips. Oh well. At least that happened after I took the picture.

These adorable little clamps caught my initially due to the bells; they're just so cute! The clamp is a typical tweezers style, with a small ring that slides up the tweezers to tighten it on your nipples, or whatever you feel needs a good clamping. I find them to be more of a beginner nipple toy though. After the first few times I used them, I found that they were as tight as they could go but I wanted more. If you yank or pull too much, they slip right off due to the flimsy plastic tips.

The bell is attached at the base of the tweezers by a little metal ring. Unfortunately, the piece inside the bell that makes it ring has a tendency to get wedged inside the bell preventing it from ringing - and it can get jammed in there pretty hard.

The clips are about 3 and 3/4 inches from tip to tip. I can spread the clamp to about an inch maximum without worrying about breaking it.

Other than trying to keep track of the plastic tips and making sure the bell ringer doesn't get jammed up, these clamps are super low maintenance. Since I am unsure if it's stainless steel or not, I don't recommend crazy cleaning because no one likes rust, but if I get oil or lube or whatever on them, I gently wipe with a warm washcloth and make sure to dry them fully with a rag. I just toss them in a little bag and pop it in my toy box.