~~Pump Up The Volume...~~

Most people think of a masturbation sleeve as just that. Well, think again when it comes to using this one! While it was designed for male masturbation or for a partner assisted handjob, this sleeve really should have been designed for using inside a penis pump. Yes--you read that right!!

When you wrap one end around the exterior of a penis pump while the majority of the sleeve is inside the pump, this converts into a very stimulating and plush pump sleeve! Perfect for pumping in a fun, masturbation setting and it gets very stimulating once you learn to regulate the pressure. Pump up a few times, release the pressure, pump again, release--congratulations, you have just made your own blow job simulator! (of course it is not as good as the real deal, but closer than many toys get to the real thing!)

Titanman Tube is made of UR3. UR3 is a very porous, soft, squishy material designed to mimic the feel of human skin, and it rates a 2 on the material safety scale. It can harbor bacteria onside the pores and cannot be sterilized. With proper care, though, you can minimize some of the risk involved with porous materials.

The soft material has a high amount of drag and lube is recommended to prevent irritation due to the friction. The internal area is textured and my husband says it feels somewhat similar to a clenched vagina--but looser. When used for masturbation, it was a fail. The tube was too unwieldy, the texture not quite right and had other personal preference issues.

When it was used inside the pump, however--it became a superstar! The length was perfect for more stimulation while pumping, the texture thinned out to a pleasant and stimulating sensation and the drag was very much an important factor in the erotic sensations! My husband forgot he was edging, it really surprised him to an amazing and very fun to watch orgasm!! So...15 minutes later, we re-started and this time he was prepared.

This has an odd plastic/chemical aroma that was removed with washing. I wash these after rubbing flavored lube into them and the aroma vanishes. Oddly enough, there is no flavor left on the item, which is a good thing! I will not taste this one...sorry guys!

The sleeve is around 8" long and will accommodate a 3" internal girth easily. It will stretch to about 14" without any damage. When it is inside a pump, the material will bulge a bit but will not tear. This material is temporary--meaning it will last for a few uses but gets ripped and stretched after too many hours. (Non-consecutive, but I estimate the hours of use are around 18. I find hours to be a better use marker than how many times due to the variety of usage per person.)

When you notice tearing, you can cut a bit off the ends to prolong the sleeve if the material is still sound in other areas. I do suggest not releasing body fluids while using the sleeve to add longevity to the material. When body fluids are released it does make the bacterial growth a bit more pronounced if not thoroughly cleaned out.

Traveling is pretty easy, just place it inside a plastic bag and toy pouch. Hide in the luggage or clothing and you are ready to go.

Wash thoroughly in warm, soapy water and rinse well. Make sure you clean the interior by turning the sleeve inside out. I do add a capfull of bleach to the water--not enough to harm the material, but enough to allow for a bit of added cleaning. I also let it soak in the water for about 15 minutes. Let this air dry--it is a serious lint magnet!!

When the sleeve is dry, go back over ti with Zero Tolerance's Masturbation Foaming Cleaner--they say it will sterilize the porous material but I am not sure it does. I do know it reconditions the material and makes it feel new again. When finished with the cleaner, rub it down with cornstarch on the inside and outside to remove any tackiness.

Store in a plastic bag. Keep away from all other items--it can melt over your other toys, will leach color out and can cause serious reactions with other materials. Use only water based lube to prevent any damage to the material.

When the material becomes discolored, develops an odor or starts to get very tacky--toss it. It has degraded to an unsafe for personal use status!

Wash thoroughly in warm, soapy water and rinse well. Make sure you clean the interior by turning the sleeve inside out. I do add a capfull of bleach to the water--not enough to harm the material, but enough to allow for a bit of added cleaning. I also let it soak in the water for about 15 minutes. Let this air dry--it is a serious lint magnet!!

When the sleeve is dry, go back over ti with Zero Tolerance's Masturbation Foaming Cleaner--they say it will sterilize the porous material but I am not sure it does. I do know it reconditions the material and makes it feel new again. When finished with the cleaner, rub it down with cornstarch on the inside and outside to remove any tackiness.

Store in a plastic bag. Keep away from all other items--it can melt over your other toys, will leach color out and can cause serious reactions with other materials. Use only water based lube to prevent any damage to the material.

When the material becomes discolored, develops an odor or starts to get very tacky--toss it. It has degraded to an unsafe for personal use status!