Touche Ice small - egg discontinued by Shots media - review by MamaDivine

The Touche Ice Small is a neat little vibrator that allows the user the option to add vibration with ice! How can a girl (or guy) NOT love that!

The idea is to fill the frosted color stand with water. Place the "bullet" portion of the egg on top and set it in the freezer to allow the ice to freeze. There is a small nub that hangs from the bottom portion of the vibration portion and this will allow the water to freeze around it, combining the two parts. Giving you an ice cube on the end of your vibrator! After it is frozen, gently peel the bottom stand off from the ice cube part. It takes a bit of doing, but it should slide right out after you loosen each of the sides of it from the mold.

The small white "dot" that you see on the side of the top of the egg is your vibrator. It is a long, cylinder with a small silicone piece on the "showing end" that pushes in to start your vibrator. This can easily be popped out of the "egg" half by either pushing it from the other side or using the bullet key that is included within the package.

There is also a very thin piece of plastic that is in the shape of half an egg. This is a cover for your ice cube. Not sure why you would want to use a cover for it, beings if you leave it for too long, it will melt anyhow, but its there in case you need to use it for whatever reason. It is VERY thin and its plastic, so do not bend it. I made this mistake, thinking it was silicone, and it almost broke in half.

Use this on your clitoris, nipples, along the neck line and down the chest, inside of the thighs and anywhere else you wish to!

Small bullet requires 2 watch batteries that are included in package (and already inserted into bullet when it arrives).

The Touche Ice Small is made of silicone. It has a very smooth, velvety feeling to it. It is also very pliable and squishy. There are some ridges along the vibrating portion of the egg (the top) that may make clean up a bit tedious, but they are pretty large or wide indents. This pattern continues all around the top.

Use with water based lubricants only. Because this toy is silicone, silicone based lubricants are not recommended for this toy as it will damage the material.

Food-grade material / Hypo-allergenic / Latex free / Non-porous / Phthalates free

The Touche Ice Small measures 3 1/2 inches long, 1 1/2 inches in diameter and 5 inches in circumference. Its not "huge" by any means, but it was a bit larger than I had originally thought it might be.

The small white "dot" that you see on the side of the top of the egg is your vibrator. It is a long, cylinder with a small silicone piece on the "showing end" that pushes in to start your vibrator. This can easily be popped out of the "egg" half by either pushing it from the other side or using the bullet key that is included within the package. Its decently easy to use as far as holding onto and the material makes it so that its not going to slip out of your hand easily when it starts to melt and get messy.

The idea is to fill the frosted color stand with water. Place the "bullet" portion of the egg on top and set it in the freezer to allow the ice to freeze. There is a small nub that hangs from the bottom portion of the vibration portion and this will allow the water to freeze around it, combining the two parts. Giving you an ice cube on the end of your vibrator! After it is frozen, gently peel the bottom stand off from the ice cube part. It takes a bit of doing, but it should slide right out after you loosen each of the sides of it from the mold.

There is also a very thin piece of plastic that is in the shape of half an egg. This is a cover for your ice cube. Not sure why you would want to use a cover for it, beings if you leave it for too long, it will melt anyhow, but its there in case you need to use it for whatever reason. It is VERY thin and its plastic, so do not bend it. I made this mistake, thinking it was silicone, and it almost broke in half.

For cleaning, I would take a rag, wipe or q tip inside each of the indents that run along the top portion of the egg. This is to make sure that any bodily fluids or (maybe the sugary fluids that you might have used) make their way off the toy. Then, spray with a cleaner or antibacterial spray and wipe down. I would make sure to rinse it well though, beings that this is something that may be inserted into the mouth at a later date. You don't want that taste of cleaner!

This product did not really come with a pamphlet on what the cap was used for, so I am assuming thats what its for. It is your basic box with a plastic insert to hold each of the pieces separately. You could use this for storage, but the box is somewhat flimsy.

Fun idea: Use koolaid with this instead of water! Mio drinks, crystal light, etc etc. Get creative and make your icy treat with a little flavor! Of course, this can become sticky and you will have to mind where you are placing it (do not want to cause those nasty yeast infections or inflammation). Otherwise, this could make a really hot day, turn into a really tasty night!